Busy Monday

Back to sanding again on the Morgan Giles 30, this time the cockpit area and the aft deck.

So it was to sand back the filler and the first coat of hi build primer to make it all level once more and find out the areas that were missed the first time around 

The big different in the cockpit it is not completely flat and it all angles to the middle and so having to use a smaller sander to do this area 

Much of the area is filled, just a few small areas to fill the second time around

On the picnic boat front, the front are put back into position and just need screwing in position and then the top can be fitted to the inside face of the hull and the inboard faces trimmed and edged 

Back to the Morgan Giles 30 and starting to sand back the areas of filler and smooth off the hi build primer before giving the hull and second coat of hi build primer and then do any small areas of fine filling.

The area round the chain plate fixing will need more filling before the area is smooth enough to give the hull a second coat of hi build primer.