Starting to refit the original floor bearers back into the boat, however,there has to be a bit of reshaping the floors before they can get glassed into position again

The first two floor bearers back together as one unit, the only problem now is that the boat hull is back in its correct shape the floors do not fit the hull as well as them should and will need reshaping to fit back into the correct position 

The level shows that the forward floor is a small bit higher than it should be so that will be the first place to start togetthe floors fitted down to the correct height and position 

These are the floors for the aft end of the boat which will have to be cut about before they are refitted in the hull and glassed back into their correct position