Fitting the cockpit inwale mahogany trims and final fitting the seat backs and dry fitting the transom inner pad

Finally fitting the mahogany inner cockpit mahogany trims and final fitting the seat backs into position.

Now that the inner mahogany trims are fitted the seat backs can be strengthen up along the top edge and the fitting shoot bolts can be fitted to the top of the seat back to stop it moving when laying against it when driving the boat. 

Dry fitting the transom inner pad to see where it will need trimming to make it fi against the hull plating

The centre area will need to be cut down to to the correct height for a short shaft outboard,