Fitting and gluing the beam shelf in position and shaping it to the same angle as the rest of the roof/deck

Having repaired the cabin side it was time to shape and glue the beam shelf to inside face of the cabin side  

Having glued and screwed the beam shelf in position  and the glue cured off it was time to shape the top of the cabin side and beam shelf to the rest of the cabin 

Finally finished the top of the beam shelf and cabin side 

It is time to make the deck beam and once shaped and the ends cut to fit the beam shelf it will be time to fit the other smaller beams and then the plywood top for the cabin roof/deck and once done sheath the deck