Rubbing down the patch areas on the bottom of the Morgan Giles 30 and then giving the patches the first coats of Gelshield epoxy primer to build the protection up to the rest of the bottom

Having coated the patches with the first coat of Gelshield epoxy primer and then applied the epoxy filler it was time to go around the patches and sand back the filler 

This was done to each of the patches until they were smooth.

Some of the patches were largr than others because of the size of the pad on the cradle which the boat was on during its refit.

Once the patches were flatted back and wiped down they were given their second coat Gelshield epoxy primer.

Just got to have four more coats to be the same level of protection as the rest of the bottom.