Un-masking the waterline and toe rail ready to sand these areas, before re-masking the two areas before masking up boat to paint the hull.

Removing the masking tape, so the waterline can be sanded back to a smooth edge,so there is not a step in the paint coat between the bottom and topside paint system.

Just got to get rid of rest of the blue masking tape  and then get the fine sandpaper out to smooth the edge between the two paint systems.

All the waterline tape removed and now time to un-mask the toe rail and then it will be possible to sand the top edge under the toe rail.

The toe rail now un-masked and just needs a wipe down to get rid of the old glue from the masking tape before we are ready to remask this area and the top edge of the hull is sanded smooth.