Having cleaned up the deck beam of the glue it was then positioned on the gunwales after removing the gunwale capping to the correct position along the sides
Cutting the correct angles on the ends of the deck beam to fit into the gunwales once the gunwales have had a section cut out to fit them into so that they will be flush with the top of the gunwales
Setting the deck beam in the correct position to cut the gunwale to the correct depth to take the deck beam.
Deck beam now in position and screwed into position
Just the knees to get fitted and then the aft deck can be covered with 6 mm plywood and then a laid deck glued on top to finish the job.
No comments:
Post a Comment