Now that we have January behind us, our clients are looking forward to the new season and are getting us to start work on their boats and getting ready their boat ready for Easter. So this period of the year is always busy and this year we have a number of different projects underway from building a new dinghy and a major refit to our own classic yacht and a number of clients with boats from small motorboats to larger classic yachts.
Tuesday, 4 February 2014
Saturday, 18 January 2014
Busy week at the workshop
This week saw the hull of the Mai-Star Class dinghy reach the halfway stage of the hull being build.
But trying to get some mahogany that was going to be close to what I needed which was a piece of Mahogany 16 inch wide was difficult if not impossible to find at the right price. However, I was able to get pieces that were close and the wood is coming back from the timber merchants after having been planned down to the correct finished thickness to make the cabin sides.
So next week it will time to get out the router and cut joint for the spline to sit in and so the two halfs of the cabin sides can be made up to the full width.
Then I have the wood it is only a matter of getting the pieces glued together and once the cabin sides are glued and cleaned up it will be time to take them to the boat and start to fit them in place.
At the same time I will be time to going to my forest man for the green oak to make the new ribs for the boat and get them steamed in place. Also getting some more larch for the hull planking and then get that thicknessed and then steamed in place to finish off the hull planking that needed replacing during this refit.
Then comes the work that needs sorting out on the inside of the boat.
But trying to get some mahogany that was going to be close to what I needed which was a piece of Mahogany 16 inch wide was difficult if not impossible to find at the right price. However, I was able to get pieces that were close and the wood is coming back from the timber merchants after having been planned down to the correct finished thickness to make the cabin sides.
So next week it will time to get out the router and cut joint for the spline to sit in and so the two halfs of the cabin sides can be made up to the full width.
Then I have the wood it is only a matter of getting the pieces glued together and once the cabin sides are glued and cleaned up it will be time to take them to the boat and start to fit them in place.
At the same time I will be time to going to my forest man for the green oak to make the new ribs for the boat and get them steamed in place. Also getting some more larch for the hull planking and then get that thicknessed and then steamed in place to finish off the hull planking that needed replacing during this refit.
Then comes the work that needs sorting out on the inside of the boat.
Sunday, 12 January 2014
Boat maintenance Tips for stress free refit period and beyond
Boat Maintenance Tip # 7
Do not forget your tender & outboard
they need TLC as well if they are to give you good service during the season.
So take your outboard to the service agent to get it checked over and give yourself
peace of mind
Boat Maintenance Tip # 8
If you have a wooden boat start rubbing
down the paint work where it is damaged & put primer on the bare wood
Boat maintenance Tip #9
Get your ropes & ground Tackle check over
to make sure their ready for the new Season & get rid of any damage rope.
You do not want to end up on the local RNLI list.
Boat maintenance Tip #10
Above all enjoy your refit period and
the friends you find along the way.
Saturday, 28 December 2013
Boat Maintenance tips for a stress free fitting out time
Boat Maintenance tip # 4
When the weather is gets better it is
time to start getting the boat ready for the new season, so make sure you have
all the necessary gear to do the jobs, if not order them now through our mail
order service
Boat Maintenance tip # 5
Get your charts send to the chart agents
to be checked & corrected if needed, also next liferaft checked and or
ordered from hirer for new season
Boat Maintenance tip # 6
Check your standing & running
rigging before the start of the season better to be sailing than sitting on the
hard all season waiting for a new rig
Thursday, 26 December 2013
Boat maintenance check list for stress free winter refit.
Boat maintenance tip #1
Get refit list checked and order your
antifoul this week in time for getting the boat in the water for Easter
Boat maintenance tip # 2
Check your sails are in good condition
and if in need of repair get them to the sail maker this week before the rush
for Easter starts
Boat maintenance tip # 3
Remember to book your launch date now as
time is running out to get your boat on the date you want to be afloat
Subscribe to:
Posts (Atom)