New build dinghy getting laid up and also getting the parts together to fit it out once the hull is finished being laid up.

 The new dinghy getting hand laid up with the second of four layers of 450g CSM  and then it will released from the mould and the seats will be fitted and then the gunwales will be fitted 

Second layer laid in the mould and then the third layer in the morning before a fourth either in th afternoon or on Tuesday morning.

Then the seats can be continued to be laid up and then cut and glassed into the dinghy once it is released from the mould and then the gunwales can be nailed along the top edge of the hull once it as been trimmed. Then the inside of the hull will be flow coated with grey flow coat.