Tuesday 29 August 2017

Works dinghy restoration update

Foredeck now glued and screwed down and ready to be covered with epoxy and matting


Forward end now sorted ready for painting apart from fixing the thwart knees in position


The thwart knees in position with nails through the rubbing strake and gunwale and screwed up through the thwart to tie it all together


Gluing the transom pad to the outer skin of the hull and when cured will be glassed over with matting and resin


Fitting the aft seat bulkhead in position ready to glass in at the same time as the transom pad


The bulkhead cut down to the correct height for the aft seat to rest on when all the glassing is done 




No comments:

Post a Comment